If you’re a bit of a do-it-yourselfer, you’re probably keen to take care of the majority of the service to be done on your Mercedes Sprinter 2, but some are more complex than others and need the removal of body parts or parts to access the part you want to operate on. We would really like to help you in this task. That’s why on this web page we are going to view how to remove the bumper from a Mercedes Sprinter 2. This task is not very complex and you should have the ability to do it with few tools. For that, first we will discover how to remove the front bumper of your Mercedes Sprinter 2, then how to remove the rear bumper of this one.
How to remove the front bumper from a Mercedes Sprinter 2
So let’s begin our content page with the front bumper of your Mercedes Sprinter 2. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow to be able to disassemble the bumper of your Mercedes Sprinter 2 in good conditions:
- If you want to be more comfy, we recommend you to lift your Mercedes Sprinter 2 and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Mercedes Sprinter 2. Dependant on your vehicle features and the year of your model, you will also have the ability to find staples, to get this done, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that fastens the front bumper of your Mercedes Sprinter 2 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Mercedes Sprinter 2 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Mercedes Sprinter 2, to put it back in place follow the steps in the opposite direction.
How to remove the rear bumper from a Mercedes Sprinter 2
And to finish, whether or not the operation is quite identical, we will check out the case of removing the rear bumper from your Mercedes Sprinter 2. For each stage to avoid repeating ourselves we will only give you the broad outlines, read the part 1 if you have any concerns or questions for more details.
- Start with performing the same first stage, that is, lift your Mercedes Sprinter 2 and take out your rear wheels to be able to have an ideal working area to remove the bumper of your Mercedes Sprinter 2 without trouble
- Remove the rear wheel arches of your Mercedes Sprinter 2 to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it easier to remove the bumper from your Mercedes Sprinter 2.
- Take away the lower bindings below your Mercedes Sprinter 2.
- While doing so, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Mercedes Sprinter 2, follow the same method as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Mercedes Sprinter 2 whether it is the front one or the rear one the solutions are essentially the same and it is enough to be careful to make everything go well.
If you want more guides on the Mercedes Sprinter 2, go to our Mercedes Sprinter 2 category.
