If you’re a bit of a handy person, you’re probably wanting to take care of almost all of the work to be done on your Mercedes Slk, but some are more complex than others and require the removal of body parts or parts to access the part you want to focus on. We would like to help you in this process. That’s why in this article we are going to discover how to remove the bumper from a Mercedes Slk. This procedure is not very complex and you should be able to do it with few tools. For that, first we will see how to remove the front bumper of your Mercedes Slk, then how to remove the rear bumper of this one.
How to remove the front bumper from a Mercedes Slk
So let’s commence our article with the front bumper of your Mercedes Slk. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow to be able to disassemble the bumper of your Mercedes Slk in good conditions:
- If you want to be more comfy, we recommend you to lift your Mercedes Slk and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Mercedes Slk. According to your car features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Mercedes Slk on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go below your Mercedes Slk to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Mercedes Slk, to put it back in place follow the steps in the opposite direction.
How to remove the rear bumper from a Mercedes Slk
And to conclude, even if the operation is quite similar, we will check out the case of removing the rear bumper from your Mercedes Slk. For each stage to avoid repeating ourselves we will just give you the broad highlights, read the part 1 if you have any concerns or questions for more info.
- Start by carrying out the same first stage, that is, lift your Mercedes Slk and remove your rear wheels to be able to have an optimal working space to remove the bumper of your Mercedes Slk serenely
- Remove the rear wheel arches of your Mercedes Slk to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it less complicated to remove the bumper from your Mercedes Slk.
- Remove the lower bindings underneath your Mercedes Slk.
- At the same time, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Mercedes Slk, follow the same procedure as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Mercedes Slk whether it is the front one or the rear one the ways are essentially the same and it is enough to be careful to make everything go well.
If perhaps you have any additional questions about the Mercedes Slk, do not hesitate to consult our Mercedes Slk category.
