If you’re a bit of a handy person, you’re almost certainly eager to handle most of the maintenance to be carried out on your Mazda CX 5, but some are more complex than others and necessitate the removal of body parts or elements to access the part you want to work on. We really want to help you in this process. That’s why today we are going to discover how to remove the bumper from a Mazda CX 5. This procedure is not very complex and you should be able to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Mazda CX 5, then how to remove the rear bumper of this one.
How to remove the front bumper from a Mazda CX 5
So let’s commence our article content with the front bumper of your Mazda CX 5. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to adhere to in order to disassemble the bumper of your Mazda CX 5 in good conditions:
- If you want to be more comfy, we recommend you to lift your Mazda CX 5 and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your automobile: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Mazda CX 5. Depending on your motor vehicle features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Mazda CX 5 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go below your Mazda CX 5 to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Mazda CX 5, to put it back in place adhere to the steps in the opposite way.
How to remove the rear bumper from a Mazda CX 5
And now, even if the process is quite similar, we will check out the case of removing the rear bumper from your Mazda CX 5. For each step to avoid repeating ourselves we will simply give you the broad outlines, read the part 1 if you have any uncertainties or questions for more info.
- Start with executing the same first step, that is, lift your Mazda CX 5 and remove your rear wheels in order to have an optimal working area to remove the bumper of your Mazda CX 5 serenely
- Remove the rear wheel arches of your Mazda CX 5 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less complicated to remove the bumper from your Mazda CX 5.
- Remove the lower bindings underneath your Mazda CX 5.
- At the same time, remember to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Mazda CX 5, adhere to the same process as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Mazda CX 5 whether it is the front one or the rear one the techniques are essentially the same and it is enough to be careful to make everything go well.
If you wish more guides on the Mazda CX 5, go to our Mazda CX 5 category.
