If you’re a bit of a do-it-yourselfer, you’re likely wanting to look after most of the service to be completed on your Land Rover Evoque, but some are more difficult than others and necessitate the removal of body parts or parts to access the component you want to focus on. We would really like to help you in this process. That’s why on this web page we are going to see how to remove the bumper from a Land Rover Evoque. This procedure is not very difficult and you should be able to do it with few equipment. To accomplish this, first we will discover how to remove the front bumper of your Land Rover Evoque, then how to remove the rear bumper of this one.

remove-bumper-land-rover-evoque

How to remove the front bumper from a Land Rover Evoque

So let’s start our article with the front bumper of your Land Rover Evoque. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to in order to disassemble the bumper of your Land Rover Evoque in good conditions:

  • If you want to be more comfortable, we suggest you to put your Land Rover Evoque on stands and to remove the front wheels to have a best access to the whole front bumper.
  • Open the bonnet of your car: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Land Rover Evoque. According to your car features and the year of your model, you will also have the ability to find staples, to get this done, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is from behind your mudguard and that fastens the front bumper of your Land Rover Evoque on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go under your Land Rover Evoque to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
  • Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Land Rover Evoque, to reassemble it stick to the steps in the opposite direction.

How to remove the rear bumper from a Land Rover Evoque

And to finish, even if the process is quite equivalent, we will take a look at the case of removing the rear bumper from your Land Rover Evoque. For each stage to avoid repeating ourselves we will exclusively give you the broad outlines, read the part 1 if you have any concerns or questions for more information.

  • Start with executing the same first stage, that is, lift your Land Rover Evoque and take out your rear wheels in order to have an optimal working space to remove the bumper of your Land Rover Evoque without trouble
  • Remove the rear wheel arches of your Land Rover Evoque to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it less difficult to remove the bumper from your Land Rover Evoque.
  • Take off the lower bindings below your Land Rover Evoque.
  • While doing so, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Land Rover Evoque, stick to the same operation as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Land Rover Evoque whether it is the front one or the rear one the techniques are almost the same and it is enough to be careful to make everything go well.

To find more tips on the Land Rover Evoque, take a look at the Land Rover Evoque category.