If you’re a bit of a do-it-yourselfer, you’re quite likely willing to take care of the majority of the work to be completed on your Jeep Patriot, but some are more complex than others and necessitate the removal of body parts or parts to access the component you want to focus on. We want to help you in this process. That’s why on this web page we are going to discover how to remove the bumper from a Jeep Patriot. This task is not very complex and you should have the ability to do it with few equipment. To do so , first we will discover how to remove the front bumper of your Jeep Patriot, then how to remove the rear bumper of this one.
How to remove the front bumper from a Jeep Patriot
So let’s commence our content with the front bumper of your Jeep Patriot. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to in order to disassemble the bumper of your Jeep Patriot in good conditions:
- If you want to be more comfy, we suggest you to put your Jeep Patriot on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Jeep Patriot. Dependant on your car features and the year of your model, you will also be able to find staples, to accomplish this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Jeep Patriot on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go below your Jeep Patriot to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Jeep Patriot, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Jeep Patriot
And now, even if the operation is quite identical, we will look at the case of removing the rear bumper from your Jeep Patriot. For each step to avoid repeating ourselves we will simply give you the broad highlights, read the part 1 if you have any concerns or questions for more information.
- Start by undertaking the same first step, that is, lift your Jeep Patriot and take off your rear wheels in order to have an ideal working area to remove the bumper of your Jeep Patriot serenely
- Remove the rear wheel arches of your Jeep Patriot to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it less complicated to remove the bumper from your Jeep Patriot.
- Take off the lower bindings below your Jeep Patriot.
- While doing so, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Jeep Patriot, stick to the same procedure as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Jeep Patriot whether it is the front one or the rear one the methods are pretty much the same and it is enough to be meticulous to make everything go well.
If you wish more tutorials on the Jeep Patriot, go to our Jeep Patriot category.
