If you’re a bit of a handy person, you’re almost certainly keen to look after the vast majority of the work to be done on your Jeep Gladiator, but some are more difficult than others and necessitate the removal of body parts or elements to access the part you want to operate on. We would like to help you in this task. That’s why on this web page we are going to find out how to remove the bumper from a Jeep Gladiator. This action is not very difficult and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your Jeep Gladiator, then how to remove the rear bumper of this one.

remove-bumper-jeep-gladiator

How to remove the front bumper from a Jeep Gladiator

So let’s begin our content page with the front bumper of your Jeep Gladiator. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow in order to disassemble the bumper of your Jeep Gladiator in good conditions:

  • If you want to be more relaxed, we encourage you to put your Jeep Gladiator on stands and to remove the front wheels to have a best access to the whole front bumper.
  • Open the bonnet of your automobile: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Remove the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Jeep Gladiator. Dependant on your automobile features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your Jeep Gladiator on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go below your Jeep Gladiator to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
  • Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Jeep Gladiator, to reassemble it follow the steps in the opposite direction.

How to remove the rear bumper from a Jeep Gladiator

And to conclude, whether or not the process is quite equivalent, we will look at the case of removing the rear bumper from your Jeep Gladiator. For each step to avoid repeating ourselves we will exclusively give you the broad highlights, read the part 1 if you have any uncertainties or questions for more details.

  • Start with carrying out the same first step, that is, lift your Jeep Gladiator and take off your rear wheels in order to have an optimal working space to remove the bumper of your Jeep Gladiator serenely
  • Remove the rear wheel arches of your Jeep Gladiator to access the side bumper side brackets
  • Open your trunk
  • Remove the side brackets in your wheel arches to make it less difficult to remove the bumper from your Jeep Gladiator.
  • Take off the lower bindings below your Jeep Gladiator.
  • While doing so, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Jeep Gladiator, follow the same method as for the front bumper

Here, you have seen through these two parts, how to remove the bumper from a Jeep Gladiator whether it is the front one or the rear one the approaches are more or less the same and it is enough to be meticulous to make everything go well.

To discover more tips on the Jeep Gladiator, take a look at the Jeep Gladiator category.