If you’re a bit of a handy person, you’re most certainly eager to manage most of the work to be carried out on your Jaguar XE, but some are more difficult than others and necessitate the removal of body parts or components to access the component you want to work on. We would like to help you in this operation. That’s why on this web page we are going to find out how to remove the bumper from a Jaguar XE. This process is not very difficult and you should be able to do it with few equipment. For that, first we will see how to remove the front bumper of your Jaguar XE, then how to remove the rear bumper of this one.
How to remove the front bumper from a Jaguar XE
So let’s begin our article with the front bumper of your Jaguar XE. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to stick to in order to disassemble the bumper of your Jaguar XE in good conditions:
- If you want to be more comfortable, we recommend you to lift your Jaguar XE and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Jaguar XE. Dependant on your automobile features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your Jaguar XE on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go below your Jaguar XE to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Jaguar XE, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Jaguar XE
And to finish, even if the operation is quite identical, we will look at the case of removing the rear bumper from your Jaguar XE. For each step to avoid repeating ourselves we will only give you the broad outlines, refer to part 1 if you have any concerns or questions for more details.
- Start with carrying out the same first step, that is, lift your Jaguar XE and take off your rear wheels in order to have an ideal working area to remove the bumper of your Jaguar XE without trouble
- Remove the rear wheel arches of your Jaguar XE to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it more convenient to remove the bumper from your Jaguar XE.
- Take away the lower bindings below your Jaguar XE.
- Simultaneously, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Jaguar XE, stick to the same method as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Jaguar XE whether it is the front one or the rear one the techniques are just about the same and it is enough to be careful to make everything go well.
To discover more tips on the Jaguar XE, take a look at the Jaguar XE category.
