If you’re a bit of a handy person, you’re most certainly willing to handle most of the work to be carried out on your iveco daily, but some are more challenging than others and necessitate the removal of body parts or components to access the part you want to focus on. We want to help you in this operation. That’s why today we are going to discover how to remove the bumper from a iveco daily. This action is not very challenging and you should be able to do it with few equipment. To do so , first we will discover how to remove the front bumper of your iveco daily, then how to remove the rear bumper of this one.
How to remove the front bumper from a iveco daily
So let’s commence our document with the front bumper of your iveco daily. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow to be able to disassemble the bumper of your iveco daily in good conditions:
- If you want to be more relaxed, we encourage you to lift your iveco daily and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your automobile: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your iveco daily. Dependant on your vehicle features and the year of your model, you will also be able to find staples, to accomplish this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your iveco daily on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your iveco daily to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your iveco daily, to put it back in place follow the steps in the opposite direction.
How to remove the rear bumper from a iveco daily
And to conclude, whether or not the process is quite similar, we will take a look at the case of removing the rear bumper from your iveco daily. For each step to avoid repeating ourselves we will only give you the broad outlines, refer to part 1 if you have any doubts or questions for more information.
- Start by carrying out the same first step, that is, lift your iveco daily and take out your rear wheels to be able to have an optimal working area to remove the bumper of your iveco daily serenely
- Remove the rear wheel arches of your iveco daily to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it much easier to remove the bumper from your iveco daily.
- Take off the lower bindings underneath your iveco daily.
- At the same time, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your iveco daily, follow the same operation as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a iveco daily whether it is the front one or the rear one the ways are practically the same and it is enough to be careful to make everything go well.
To discover more tips on the iveco daily, take a look at the iveco daily category.
