If you’re a bit of a do-it-yourselfer, you’re most likely willing to handle the majority of the maintenance to be carried out on your Infiniti Q60, but some are more difficult than others and need the removal of body parts or elements to access the part you want to focus on. We would like to help you in this task. That’s why today we are going to see how to remove the bumper from a Infiniti Q60. This operation is not very difficult and you should have the ability to do it with few equipment. For that, first we will discover how to remove the front bumper of your Infiniti Q60, then how to remove the rear bumper of this one.
How to remove the front bumper from a Infiniti Q60
So let’s commence our content with the front bumper of your Infiniti Q60. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow in order to disassemble the bumper of your Infiniti Q60 in good conditions:
- If you want to be more relaxed, we suggest you to put your Infiniti Q60 on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your automobile: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Infiniti Q60. According to your vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that seals the front bumper of your Infiniti Q60 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Infiniti Q60 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Infiniti Q60, to put it back in place follow the steps in the opposite direction.
How to remove the rear bumper from a Infiniti Q60
And now, regardless if the process is quite equivalent, we will take a look at the case of removing the rear bumper from your Infiniti Q60. For each stage to avoid repeating ourselves we will exclusively give you the broad outlines, refer to part 1 if you have any concerns or questions for more info.
- Start with undertaking the same first stage, that is, lift your Infiniti Q60 and take off your rear wheels in order to have an ideal working area to remove the bumper of your Infiniti Q60 without trouble
- Remove the rear wheel arches of your Infiniti Q60 to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it more convenient to remove the bumper from your Infiniti Q60.
- Take out the lower bindings below your Infiniti Q60.
- While doing so, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Infiniti Q60, follow the same operation as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Infiniti Q60 whether it is the front one or the rear one the ways are almost the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Infiniti Q60, take a look at the Infiniti Q60 category.
