If you’re a bit of a do-it-yourselfer, you’re most likely keen to manage almost all of the service to be done on your Hyundai Tucson, but some are more complicated than others and necessitate the removal of body parts or components to access the part you want to work on. We would really like to help you in this process. That’s why today we are going to see how to remove the bumper from a Hyundai Tucson. This operation is not very complicated and you should have the ability to do it with few equipment. For that, first we will discover how to remove the front bumper of your Hyundai Tucson, then how to remove the rear bumper of this one.
How to remove the front bumper from a Hyundai Tucson
So let’s commence our content with the front bumper of your Hyundai Tucson. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow in order to disassemble the bumper of your Hyundai Tucson in good conditions:
- If you want to be more relaxed, we advise you to lift your Hyundai Tucson and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your car: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also named fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Hyundai Tucson. Depending on your motor vehicle features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Hyundai Tucson on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Hyundai Tucson to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Hyundai Tucson, to reassemble it follow the steps in the opposite way.
How to remove the rear bumper from a Hyundai Tucson
And to conclude, regardless if the process is quite identical, we will check out the case of removing the rear bumper from your Hyundai Tucson. For each stage to avoid repeating ourselves we will exclusively give you the broad outlines, read the part 1 if you have any doubts or questions for more info.
- Start with executing the same first stage, that is, lift your Hyundai Tucson and take off your rear wheels in order to have an optimal working area to remove the bumper of your Hyundai Tucson without trouble
- Remove the rear wheel arches of your Hyundai Tucson to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it less complicated to remove the bumper from your Hyundai Tucson.
- Take out the lower bindings underneath your Hyundai Tucson.
- Simultaneously, make sure un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Hyundai Tucson, follow the same technique as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Hyundai Tucson whether it is the front one or the rear one the ways are practically the same and it is enough to be careful to make everything go well.
To find more tips on the Hyundai Tucson, take a look at the Hyundai Tucson category.
