If you’re a bit of a do-it-yourselfer, you’re probably eager to manage the vast majority of the work to be done on your Ford Mustang, but some are more complicated than others and need the removal of body parts or parts to access the part you want to focus on. We would really like to help you in this task. That’s why today we are going to discover how to remove the bumper from a Ford Mustang. This task is not very complicated and you should be able to do it with few tools. To do so , first we will discover how to remove the front bumper of your Ford Mustang, then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford Mustang
So let’s start our document with the front bumper of your Ford Mustang. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to in order to disassemble the bumper of your Ford Mustang in good conditions:
- If you want to be more comfy, we encourage you to lift your Ford Mustang and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Ford Mustang. According to your automobile features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Ford Mustang on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Ford Mustang to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford Mustang, to put it back in place adhere to the steps in the opposite direction.
How to remove the rear bumper from a Ford Mustang
And to conclude, even if the process is quite equivalent, we will take a look at the case of removing the rear bumper from your Ford Mustang. For each stage to avoid repeating ourselves we will only give you the broad highlights, read the part 1 if you have any concerns or questions for more info.
- Start with performing the same first stage, that is, lift your Ford Mustang and remove your rear wheels in order to have an ideal working space to remove the bumper of your Ford Mustang without trouble
- Remove the rear wheel arches of your Ford Mustang to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it much easier to remove the bumper from your Ford Mustang.
- Remove the lower bindings underneath your Ford Mustang.
- At the same time, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford Mustang, adhere to the same technique as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Ford Mustang whether it is the front one or the rear one the ways are more or less the same and it is enough to be careful to make everything go well.
Whenever you have any further questions about the Ford Mustang, do not hesitate to consult our Ford Mustang category.
