If you’re a bit of a do-it-yourselfer, you’re likely eager to manage the majority of the work to be completed on your Ford Fusion, but some are more difficult than others and necessitate the removal of body parts or parts to access the part you want to focus on. We would really like to help you in this task. That’s why in this article we are going to see how to remove the bumper from a Ford Fusion. This operation is not very difficult and you should be able to do it with few tools. For that, first we will discover how to remove the front bumper of your Ford Fusion, then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford Fusion
So let’s commence our document with the front bumper of your Ford Fusion. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to to be able to disassemble the bumper of your Ford Fusion in good conditions:
- If you want to be more comfy, we suggest you to put your Ford Fusion on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your automobile: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Ford Fusion. According to your automobile features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that seals the front bumper of your Ford Fusion on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Ford Fusion to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford Fusion, to put it back in place adhere to the steps in the opposite way.
How to remove the rear bumper from a Ford Fusion
And now, whether or not the process is quite similar, we will check out the case of removing the rear bumper from your Ford Fusion. For each stage to avoid repeating ourselves we will simply give you the broad outlines, read the part 1 if you have any uncertainties or questions for more info.
- Start by executing the same first stage, that is, lift your Ford Fusion and remove your rear wheels to be able to have an ideal working area to remove the bumper of your Ford Fusion without trouble
- Remove the rear wheel arches of your Ford Fusion to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it much easier to remove the bumper from your Ford Fusion.
- Take out the lower bindings below your Ford Fusion.
- While doing so, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford Fusion, adhere to the same operation as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Ford Fusion whether it is the front one or the rear one the techniques are almost the same and it is enough to be careful to make everything go well.
If you have any further questions about the Ford Fusion, do not hesitate to consult our Ford Fusion category.
