If you’re a bit of a do-it-yourselfer, you’re most certainly wanting to look after the majority of the service to be completed on your Ford Focus, but some are more complicated than others and require the removal of body parts or parts to access the component you want to operate on. We would like to help you in this task. That’s why today we are going to see how to remove the bumper from a Ford Focus. This action is not very complicated and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your Ford Focus, then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford Focus
So let’s start our document with the front bumper of your Ford Focus. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to to be able to disassemble the bumper of your Ford Focus in good conditions:
- If you want to be more relaxed, we suggest you to lift your Ford Focus and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your automobile: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Ford Focus. According to your car features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Ford Focus on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Ford Focus to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford Focus, to put it back in place stick to the steps in the opposite direction.
How to remove the rear bumper from a Ford Focus
And to conclude, regardless if the process is quite similar, we will look at the case of removing the rear bumper from your Ford Focus. For each stage to avoid repeating ourselves we will exclusively give you the broad highlights, read the part 1 if you have any doubts or questions for more info.
- Start with undertaking the same first stage, that is, lift your Ford Focus and take out your rear wheels to be able to have an ideal working area to remove the bumper of your Ford Focus serenely
- Remove the rear wheel arches of your Ford Focus to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it less difficult to remove the bumper from your Ford Focus.
- Remove the lower bindings below your Ford Focus.
- At the same time, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford Focus, stick to the same operation as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Ford Focus whether it is the front one or the rear one the techniques are just about the same and it is enough to be meticulous to make everything go well.
In the event that you have any further questions about the Ford Focus, do not hesitate to consult our Ford Focus category.
