If you’re a bit of a handy person, you’re almost certainly willing to take care of most of the maintenance to be achieved on your Ford F 450, but some are more difficult than others and necessitate the removal of body parts or elements to access the component you want to focus on. We want to help you in this task. That’s why on this web page we are going to view how to remove the bumper from a Ford F 450. This process is not very difficult and you should have the ability to do it with few equipment. To accomplish this, first we will discover how to remove the front bumper of your Ford F 450, then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford F 450
So let’s commence our document with the front bumper of your Ford F 450. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to adhere to in order to disassemble the bumper of your Ford F 450 in good conditions:
- If you want to be more comfortable, we recommend you to put your Ford F 450 on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Ford F 450. According to your automobile features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that seals the front bumper of your Ford F 450 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Ford F 450 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford F 450, to put it back in place adhere to the steps in the opposite direction.
How to remove the rear bumper from a Ford F 450
And to conclude, regardless if the operation is quite equivalent, we will look at the case of removing the rear bumper from your Ford F 450. For each step to avoid repeating ourselves we will simply give you the broad highlights, refer to part 1 if you have any concerns or questions for more details.
- Start by carrying out the same first step, that is, lift your Ford F 450 and remove your rear wheels in order to have an ideal working area to remove the bumper of your Ford F 450 serenely
- Remove the rear wheel arches of your Ford F 450 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less difficult to remove the bumper from your Ford F 450.
- Take out the lower bindings below your Ford F 450.
- Simultaneously, remember to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford F 450, adhere to the same technique as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Ford F 450 whether it is the front one or the rear one the solutions are just about the same and it is enough to be meticulous to make everything go well.
Whenever you have any additional questions about the Ford F 450, do not hesitate to consult our Ford F 450 category.