If you’re a bit of a do-it-yourselfer, you’re almost certainly keen to look after the majority of the service to be done on your Ford F 150 , but some are more complicated than others and necessitate the removal of body parts or components to access the component you want to work on. We really want to help you in this task. That’s why today we are going to find out how to remove the bumper from a Ford F 150 . This operation is not very complicated and you should have the ability to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Ford F 150 , then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford F 150
So let’s commence our article content with the front bumper of your Ford F 150 . To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow in order to disassemble the bumper of your Ford F 150 in good conditions:
- If you want to be more relaxed, we suggest you to lift your Ford F 150 and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Ford F 150 . Depending on your car features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Ford F 150 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Ford F 150 to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Be sure you unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford F 150 , to put it back in place follow the steps in the opposite way.
How to remove the rear bumper from a Ford F 150
And now, regardless if the process is quite identical, we will check out the case of removing the rear bumper from your Ford F 150 . For each stage to avoid repeating ourselves we will just give you the broad outlines, read the part 1 if you have any concerns or questions for more details.
- Start with executing the same first stage, that is, lift your Ford F 150 and take out your rear wheels in order to have an optimal working space to remove the bumper of your Ford F 150 without trouble
- Remove the rear wheel arches of your Ford F 150 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less complicated to remove the bumper from your Ford F 150 .
- Take away the lower bindings underneath your Ford F 150 .
- While doing so, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford F 150 , follow the same method as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Ford F 150 whether it is the front one or the rear one the ways are pretty much the same and it is enough to be meticulous to make everything go well.
To get more tips on the Ford F 150 , take a look at the Ford F 150 category.
