If you’re a bit of a do-it-yourselfer, you’re almost certainly wanting to handle most of the work to be achieved on your Dacia Sandero 2, but some are more difficult than others and need the removal of body parts or elements to access the component you want to focus on. We would like to help you in this process. That’s why in this article we are going to find out how to remove the bumper from a Dacia Sandero 2. This procedure is not very difficult and you should have the ability to do it with few equipment. To accomplish this, first we will discover how to remove the front bumper of your Dacia Sandero 2, then how to remove the rear bumper of this one.
How to remove the front bumper from a Dacia Sandero 2
So let’s commence our content with the front bumper of your Dacia Sandero 2. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to to be able to disassemble the bumper of your Dacia Sandero 2 in good conditions:
- If you want to be more comfortable, we recommend you to put your Dacia Sandero 2 on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Dacia Sandero 2. According to your automobile features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that seals the front bumper of your Dacia Sandero 2 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go under your Dacia Sandero 2 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Dacia Sandero 2, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Dacia Sandero 2
And to conclude, even if the process is quite identical, we will check out the case of removing the rear bumper from your Dacia Sandero 2. For each stage to avoid repeating ourselves we will simply give you the broad outlines, read the part 1 if you have any doubts or questions for more information.
- Start by performing the same first stage, that is, lift your Dacia Sandero 2 and take out your rear wheels to be able to have an ideal working area to remove the bumper of your Dacia Sandero 2 without trouble
- Remove the rear wheel arches of your Dacia Sandero 2 to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it less difficult to remove the bumper from your Dacia Sandero 2.
- Take off the lower bindings underneath your Dacia Sandero 2.
- At the same time, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Dacia Sandero 2, stick to the same operation as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Dacia Sandero 2 whether it is the front one or the rear one the approaches are practically the same and it is enough to be meticulous to make everything go well.
If you want more tutorials on the Dacia Sandero 2, go to our Dacia Sandero 2 category.
