If you’re a bit of a handy person, you’re likely willing to look after most of the maintenance to be carried out on your Dacia Lodgy, but some are more challenging than others and need the removal of body parts or components to access the part you want to operate on. We want to help you in this process. That’s why in this article we are going to view how to remove the bumper from a Dacia Lodgy. This procedure is not very challenging and you should be able to do it with few tools. To do so , first we will discover how to remove the front bumper of your Dacia Lodgy, then how to remove the rear bumper of this one.
How to remove the front bumper from a Dacia Lodgy
So let’s start our article content with the front bumper of your Dacia Lodgy. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to adhere to to be able to disassemble the bumper of your Dacia Lodgy in good conditions:
- If you want to be more comfy, we advise you to put your Dacia Lodgy on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your automobile: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also named fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Dacia Lodgy. Depending on your automobile features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that fastens the front bumper of your Dacia Lodgy on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Dacia Lodgy to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Dacia Lodgy, to reassemble it adhere to the steps in the opposite way.
How to remove the rear bumper from a Dacia Lodgy
And to finish, even if the process is quite identical, we will check out the case of removing the rear bumper from your Dacia Lodgy. For each stage to avoid repeating ourselves we will only give you the broad outlines, refer to part 1 if you have any uncertainties or questions for more details.
- Start by carrying out the same first stage, that is, lift your Dacia Lodgy and remove your rear wheels to be able to have an ideal working area to remove the bumper of your Dacia Lodgy without trouble
- Remove the rear wheel arches of your Dacia Lodgy to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it easier to remove the bumper from your Dacia Lodgy.
- Take out the lower bindings underneath your Dacia Lodgy.
- While doing so, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Dacia Lodgy, adhere to the same process as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Dacia Lodgy whether it is the front one or the rear one the ways are practically the same and it is enough to be meticulous to make everything go well.
To find more tips on the Dacia Lodgy, take a look at the Dacia Lodgy category.
