If you’re a bit of a handy person, you’re probably keen to manage the majority of the work to be carried out on your Dacia Dokker, but some are more difficult than others and necessitate the removal of body parts or parts to access the component you want to operate on. We want to help you in this process. That’s why in this article we are going to find out how to remove the bumper from a Dacia Dokker. This task is not very difficult and you should have the ability to do it with few tools. For that, first we will see how to remove the front bumper of your Dacia Dokker, then how to remove the rear bumper of this one.
How to remove the front bumper from a Dacia Dokker
So let’s commence our document with the front bumper of your Dacia Dokker. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow in order to disassemble the bumper of your Dacia Dokker in good conditions:
- If you want to be more comfortable, we encourage you to put your Dacia Dokker on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your car: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Dacia Dokker. According to your automobile features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Dacia Dokker on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Dacia Dokker to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Dacia Dokker, to reassemble it follow the steps in the opposite direction.
How to remove the rear bumper from a Dacia Dokker
And now, whether or not the operation is quite identical, we will take a look at the case of removing the rear bumper from your Dacia Dokker. For each stage to avoid repeating ourselves we will just give you the broad outlines, read the part 1 if you have any concerns or questions for more info.
- Start by carrying out the same first stage, that is, lift your Dacia Dokker and take out your rear wheels in order to have an optimal working area to remove the bumper of your Dacia Dokker serenely
- Remove the rear wheel arches of your Dacia Dokker to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it less complicated to remove the bumper from your Dacia Dokker.
- Take out the lower bindings below your Dacia Dokker.
- At the same time, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Dacia Dokker, follow the same technique as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Dacia Dokker whether it is the front one or the rear one the approaches are practically the same and it is enough to be meticulous to make everything go well.
If you wish more tutorials on the Dacia Dokker, go to our Dacia Dokker category.
