If you’re a bit of a do-it-yourselfer, you’re probably willing to take care of most of the service to be done on your Chrysler Sebring, but some are more complicated than others and need the removal of body parts or elements to access the part you want to focus on. We would really like to help you in this task. That’s why today we are going to find out how to remove the bumper from a Chrysler Sebring. This process is not very complicated and you should be able to do it with few tools. For that, first we will see how to remove the front bumper of your Chrysler Sebring, then how to remove the rear bumper of this one.

remove-bumper-chrysler-sebring

How to remove the front bumper from a Chrysler Sebring

So let’s begin our article with the front bumper of your Chrysler Sebring. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to to be able to disassemble the bumper of your Chrysler Sebring in good conditions:

  • If you want to be more comfy, we advise you to lift your Chrysler Sebring and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your automobile: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take off the wheel arches: They’re also identified as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Chrysler Sebring. Dependant on your motor vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is from behind your mudguard and that fastens the front bumper of your Chrysler Sebring on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go below your Chrysler Sebring to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
  • Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of working with a carpet or other to prevent that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Chrysler Sebring, to put it back in place adhere to the steps in the opposite direction.

How to remove the rear bumper from a Chrysler Sebring

And to finish, regardless if the operation is quite identical, we will look at the case of removing the rear bumper from your Chrysler Sebring. For each step to avoid repeating ourselves we will exclusively give you the broad outlines, read the part 1 if you have any concerns or questions for more information.

  • Start with executing the same first step, that is, lift your Chrysler Sebring and take out your rear wheels to be able to have an ideal working space to remove the bumper of your Chrysler Sebring serenely
  • Remove the rear wheel arches of your Chrysler Sebring to access the side bumper side brackets
  • Open your trunk
  • Take off the side brackets in your wheel arches to make it more convenient to remove the bumper from your Chrysler Sebring.
  • Remove the lower bindings below your Chrysler Sebring.
  • Simultaneously, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Chrysler Sebring, adhere to the same procedure as for the front bumper

Here, you have learned through these two parts, how to remove the bumper from a Chrysler Sebring whether it is the front one or the rear one the ways are almost the same and it is enough to be meticulous to make everything go well.

If you want more guides on the Chrysler Sebring, go to our Chrysler Sebring category.