If you’re a bit of a handy person, you’re most certainly keen to take care of most of the maintenance to be carried out on your Chevrolet Bolt, but some are more difficult than others and need the removal of body parts or parts to access the part you want to focus on. We really want to help you in this operation. That’s why on this web page we are going to view how to remove the bumper from a Chevrolet Bolt. This task is not very difficult and you should be able to do it with few equipment. For that, first we will see how to remove the front bumper of your Chevrolet Bolt, then how to remove the rear bumper of this one.
How to remove the front bumper from a Chevrolet Bolt
So let’s start our article with the front bumper of your Chevrolet Bolt. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to in order to disassemble the bumper of your Chevrolet Bolt in good conditions:
- If you want to be more relaxed, we suggest you to put your Chevrolet Bolt on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Chevrolet Bolt. According to your car features and the year of your model, you will also be able to find staples, to accomplish this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Chevrolet Bolt on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Chevrolet Bolt to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure to unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Chevrolet Bolt, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Chevrolet Bolt
And to finish, even if the process is quite equivalent, we will look at the case of removing the rear bumper from your Chevrolet Bolt. For each step to avoid repeating ourselves we will exclusively give you the broad highlights, refer to part 1 if you have any doubts or questions for more info.
- Start with undertaking the same first step, that is, lift your Chevrolet Bolt and take off your rear wheels in order to have an ideal working space to remove the bumper of your Chevrolet Bolt serenely
- Remove the rear wheel arches of your Chevrolet Bolt to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it less difficult to remove the bumper from your Chevrolet Bolt.
- Take out the lower bindings underneath your Chevrolet Bolt.
- While doing so, make sure un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Chevrolet Bolt, stick to the same process as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Chevrolet Bolt whether it is the front one or the rear one the ways are pretty much the same and it is enough to be meticulous to make everything go well.
If you wish more guides on the Chevrolet Bolt, go to our Chevrolet Bolt category.
