If you’re a bit of a do-it-yourselfer, you’re probably keen to look after the vast majority of the service to be achieved on your Cadillac XTS, but some are more complex than others and require the removal of body parts or parts to access the component you want to focus on. We want to help you in this process. That’s why on this web page we are going to see how to remove the bumper from a Cadillac XTS. This action is not very complex and you should have the ability to do it with few equipment. To accomplish this, first we will discover how to remove the front bumper of your Cadillac XTS, then how to remove the rear bumper of this one.
How to remove the front bumper from a Cadillac XTS
So let’s start our article with the front bumper of your Cadillac XTS. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to in order to disassemble the bumper of your Cadillac XTS in good conditions:
- If you want to be more comfortable, we encourage you to lift your Cadillac XTS and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Cadillac XTS. Dependant on your motor vehicle features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Cadillac XTS on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Cadillac XTS to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Cadillac XTS, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Cadillac XTS
And now, regardless if the process is quite identical, we will take a look at the case of removing the rear bumper from your Cadillac XTS. For each step to avoid repeating ourselves we will just give you the broad outlines, refer to part 1 if you have any concerns or questions for more details.
- Start by undertaking the same first step, that is, lift your Cadillac XTS and remove your rear wheels in order to have an optimal working space to remove the bumper of your Cadillac XTS serenely
- Remove the rear wheel arches of your Cadillac XTS to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it less complicated to remove the bumper from your Cadillac XTS.
- Take away the lower bindings underneath your Cadillac XTS.
- Simultaneously, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Cadillac XTS, stick to the same process as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Cadillac XTS whether it is the front one or the rear one the solutions are essentially the same and it is enough to be careful to make everything go well.
If you wish more guides on the Cadillac XTS, go to our Cadillac XTS category.
