If you’re a bit of a handy person, you’re most certainly keen to take care of the majority of the maintenance to be completed on your Bmw Serie 7, but some are more difficult than others and necessitate the removal of body parts or parts to access the part you want to focus on. We would really like to help you in this operation. That’s why today we are going to discover how to remove the bumper from a Bmw Serie 7. This task is not very difficult and you should have the ability to do it with few tools. For that, first we will discover how to remove the front bumper of your Bmw Serie 7, then how to remove the rear bumper of this one.
How to remove the front bumper from a Bmw Serie 7
So let’s begin our article content with the front bumper of your Bmw Serie 7. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow to be able to disassemble the bumper of your Bmw Serie 7 in good conditions:
- If you want to be more comfy, we suggest you to put your Bmw Serie 7 on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your automobile: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Bmw Serie 7. According to your vehicle features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that seals the front bumper of your Bmw Serie 7 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Bmw Serie 7 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure to unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Bmw Serie 7, to put it back in place follow the steps in the opposite way.
How to remove the rear bumper from a Bmw Serie 7
And now, even if the procedure is quite similar, we will take a look at the case of removing the rear bumper from your Bmw Serie 7. For each stage to avoid repeating ourselves we will simply give you the broad outlines, read the part 1 if you have any uncertainties or questions for more info.
- Start by carrying out the same first stage, that is, lift your Bmw Serie 7 and take out your rear wheels to be able to have an optimal working area to remove the bumper of your Bmw Serie 7 without trouble
- Remove the rear wheel arches of your Bmw Serie 7 to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it less complicated to remove the bumper from your Bmw Serie 7.
- Take away the lower bindings below your Bmw Serie 7.
- Simultaneously, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Bmw Serie 7, follow the same technique as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Bmw Serie 7 whether it is the front one or the rear one the methods are practically the same and it is enough to be careful to make everything go well.
If you need more tutorials on the Bmw Serie 7, go to our Bmw Serie 7 category.
