If you’re a bit of a handy person, you’re almost certainly willing to take care of most of the service to be achieved on your Bmw Serie 2, but some are more challenging than others and need the removal of body parts or elements to access the component you want to operate on. We would really like to help you in this process. That’s why on this web page we are going to find out how to remove the bumper from a Bmw Serie 2. This action is not very challenging and you should be able to do it with few equipment. For that, first we will discover how to remove the front bumper of your Bmw Serie 2, then how to remove the rear bumper of this one.
How to remove the front bumper from a Bmw Serie 2
So let’s begin our document with the front bumper of your Bmw Serie 2. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to in order to disassemble the bumper of your Bmw Serie 2 in good conditions:
- If you want to be more comfy, we encourage you to put your Bmw Serie 2 on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Bmw Serie 2. According to your car features and the year of your model, you will also be able to find staples, to accomplish this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your Bmw Serie 2 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go beneath your Bmw Serie 2 to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Bmw Serie 2, to put it back in place stick to the steps in the opposite direction.
How to remove the rear bumper from a Bmw Serie 2
And now, even if the procedure is quite equivalent, we will take a look at the case of removing the rear bumper from your Bmw Serie 2. For each step to avoid repeating ourselves we will just give you the broad outlines, read the part 1 if you have any uncertainties or questions for more information.
- Start by executing the same first step, that is, lift your Bmw Serie 2 and take off your rear wheels in order to have an ideal working area to remove the bumper of your Bmw Serie 2 serenely
- Remove the rear wheel arches of your Bmw Serie 2 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it more convenient to remove the bumper from your Bmw Serie 2.
- Take away the lower bindings below your Bmw Serie 2.
- At the same time, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Bmw Serie 2, stick to the same process as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Bmw Serie 2 whether it is the front one or the rear one the methods are pretty much the same and it is enough to be careful to make everything go well.
If you have any additional questions about the Bmw Serie 2, do not hesitate to consult our Bmw Serie 2 category.
