If you’re a bit of a do-it-yourselfer, you’re most likely wanting to look after the majority of the work to be done on your Bmw Serie 1 E82, but some are more challenging than others and necessitate the removal of body parts or elements to access the component you want to operate on. We would like to help you in this task. That’s why in this article we are going to find out how to remove the bumper from a Bmw Serie 1 E82. This operation is not very challenging and you should be able to do it with few equipment. To do so , first we will see how to remove the front bumper of your Bmw Serie 1 E82, then how to remove the rear bumper of this one.

remove-bumper-bmw-serie-1-e82

How to remove the front bumper from a Bmw Serie 1 E82

So let’s commence our document with the front bumper of your Bmw Serie 1 E82. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to in order to disassemble the bumper of your Bmw Serie 1 E82 in good conditions:

  • If you want to be more relaxed, we advise you to put your Bmw Serie 1 E82 on stands and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your vehicle: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take off the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Bmw Serie 1 E82. According to your vehicle features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is in back of your mudguard and that fastens the front bumper of your Bmw Serie 1 E82 on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go beneath your Bmw Serie 1 E82 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
  • Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Bmw Serie 1 E82, to put it back in place adhere to the steps in the opposite way.

How to remove the rear bumper from a Bmw Serie 1 E82

And now, regardless if the process is quite equivalent, we will check out the case of removing the rear bumper from your Bmw Serie 1 E82. For each stage to avoid repeating ourselves we will exclusively give you the broad highlights, refer to part 1 if you have any doubts or questions for more info.

  • Start with executing the same first stage, that is, lift your Bmw Serie 1 E82 and take off your rear wheels in order to have an optimal working space to remove the bumper of your Bmw Serie 1 E82 without trouble
  • Remove the rear wheel arches of your Bmw Serie 1 E82 to access the side bumper side brackets
  • Open your trunk
  • Take off the side brackets in your wheel arches to make it less difficult to remove the bumper from your Bmw Serie 1 E82.
  • Take away the lower bindings underneath your Bmw Serie 1 E82.
  • While doing so, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Bmw Serie 1 E82, adhere to the same process as for the front bumper

Here, you have seen through these two parts, how to remove the bumper from a Bmw Serie 1 E82 whether it is the front one or the rear one the techniques are essentially the same and it is enough to be meticulous to make everything go well.

If you want more tutorials on the Bmw Serie 1 E82, go to our Bmw Serie 1 E82 category.