If you’re a bit of a do-it-yourselfer, you’re probably willing to manage the majority of the service to be carried out on your Bmw 1 series, but some are more challenging than others and necessitate the removal of body parts or elements to access the component you want to focus on. We really want to help you in this process. That’s why on this web page we are going to see how to remove the bumper from a Bmw 1 series. This procedure is not very challenging and you should be able to do it with few tools. To accomplish this, first we will see how to remove the front bumper of your Bmw 1 series, then how to remove the rear bumper of this one.
How to remove the front bumper from a Bmw 1 series
So let’s commence our article content with the front bumper of your Bmw 1 series. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow to be able to disassemble the bumper of your Bmw 1 series in good conditions:
- If you want to be more comfy, we recommend you to put your Bmw 1 series on stands and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your car: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Bmw 1 series. Dependant on your car features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Bmw 1 series on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Bmw 1 series to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Bmw 1 series, to reassemble it follow the steps in the opposite way.
How to remove the rear bumper from a Bmw 1 series
And to conclude, whether or not the procedure is quite equivalent, we will check out the case of removing the rear bumper from your Bmw 1 series. For each stage to avoid repeating ourselves we will simply give you the broad highlights, refer to part 1 if you have any doubts or questions for more details.
- Start with carrying out the same first stage, that is, lift your Bmw 1 series and remove your rear wheels to be able to have an ideal working space to remove the bumper of your Bmw 1 series serenely
- Remove the rear wheel arches of your Bmw 1 series to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it much easier to remove the bumper from your Bmw 1 series.
- Take out the lower bindings below your Bmw 1 series.
- At the same time, make sure un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Bmw 1 series, follow the same technique as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Bmw 1 series whether it is the front one or the rear one the approaches are essentially the same and it is enough to be careful to make everything go well.
To find more tips on the Bmw 1 series, take a look at the Bmw 1 series category.
