If you’re a bit of a handy person, you’re most certainly eager to manage the majority of the service to be achieved on your Audi Rs5, but some are more difficult than others and necessitate the removal of body parts or elements to access the part you want to focus on. We really want to help you in this task. That’s why today we are going to find out how to remove the bumper from a Audi Rs5. This procedure is not very difficult and you should have the ability to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Audi Rs5, then how to remove the rear bumper of this one.
How to remove the front bumper from a Audi Rs5
So let’s commence our article content with the front bumper of your Audi Rs5. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to in order to disassemble the bumper of your Audi Rs5 in good conditions:
- If you want to be more comfy, we suggest you to put your Audi Rs5 on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Audi Rs5. Dependant on your motor vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that locks the front bumper of your Audi Rs5 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go below your Audi Rs5 to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Audi Rs5, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Audi Rs5
And now, regardless if the procedure is quite equivalent, we will take a look at the case of removing the rear bumper from your Audi Rs5. For each step to avoid repeating ourselves we will just give you the broad highlights, refer to part 1 if you have any uncertainties or questions for more details.
- Start by carrying out the same first step, that is, lift your Audi Rs5 and take off your rear wheels in order to have an optimal working area to remove the bumper of your Audi Rs5 without trouble
- Remove the rear wheel arches of your Audi Rs5 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it more convenient to remove the bumper from your Audi Rs5.
- Take away the lower bindings below your Audi Rs5.
- While doing so, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Audi Rs5, stick to the same operation as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Audi Rs5 whether it is the front one or the rear one the techniques are essentially the same and it is enough to be meticulous to make everything go well.
If you have any additional questions about the Audi Rs5, do not hesitate to consult our Audi Rs5 category.
