If you’re a bit of a handy person, you’re quite likely keen to manage the vast majority of the work to be completed on your Audi Q7, but some are more complex than others and need the removal of body parts or elements to access the part you want to operate on. We want to help you in this task. That’s why on this web page we are going to find out how to remove the bumper from a Audi Q7. This process is not very complex and you should have the ability to do it with few equipment. To accomplish this, first we will see how to remove the front bumper of your Audi Q7, then how to remove the rear bumper of this one.
How to remove the front bumper from a Audi Q7
So let’s start our content page with the front bumper of your Audi Q7. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow to be able to disassemble the bumper of your Audi Q7 in good conditions:
- If you want to be more relaxed, we suggest you to put your Audi Q7 on stands and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Audi Q7. Depending on your car features and the year of your model, you will also be able to find staples, to accomplish this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Audi Q7 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Audi Q7 to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Audi Q7, to put it back in place follow the steps in the opposite direction.
How to remove the rear bumper from a Audi Q7
And now, regardless if the operation is quite equivalent, we will check out the case of removing the rear bumper from your Audi Q7. For each stage to avoid repeating ourselves we will only give you the broad highlights, read the part 1 if you have any uncertainties or questions for more info.
- Start with performing the same first stage, that is, lift your Audi Q7 and take out your rear wheels to be able to have an ideal working space to remove the bumper of your Audi Q7 without trouble
- Remove the rear wheel arches of your Audi Q7 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less complicated to remove the bumper from your Audi Q7.
- Take out the lower bindings below your Audi Q7.
- Simultaneously, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Audi Q7, follow the same method as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Audi Q7 whether it is the front one or the rear one the solutions are practically the same and it is enough to be meticulous to make everything go well.
In the event that you have any additional questions about the Audi Q7, do not hesitate to consult our Audi Q7 category.
