If you’re a bit of a handy person, you’re likely wanting to take care of the majority of the maintenance to be achieved on your Audi A5, but some are more complicated than others and necessitate the removal of body parts or elements to access the part you want to focus on. We really want to help you in this operation. That’s why in this article we are going to see how to remove the bumper from a Audi A5. This operation is not very complicated and you should have the ability to do it with few equipment. For that, first we will discover how to remove the front bumper of your Audi A5, then how to remove the rear bumper of this one.

remove-bumper-audi-a5

How to remove the front bumper from a Audi A5

So let’s commence our article with the front bumper of your Audi A5. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow to be able to disassemble the bumper of your Audi A5 in good conditions:

  • If you want to be more comfortable, we recommend you to lift your Audi A5 and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your automobile: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Audi A5. According to your car features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your Audi A5 on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go beneath your Audi A5 to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
  • Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Audi A5, to put it back in place follow the steps in the opposite way.

How to remove the rear bumper from a Audi A5

And to conclude, whether or not the procedure is quite similar, we will check out the case of removing the rear bumper from your Audi A5. For each stage to avoid repeating ourselves we will just give you the broad outlines, read the part 1 if you have any concerns or questions for more details.

  • Start with undertaking the same first stage, that is, lift your Audi A5 and take out your rear wheels to be able to have an ideal working area to remove the bumper of your Audi A5 without trouble
  • Remove the rear wheel arches of your Audi A5 to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it much easier to remove the bumper from your Audi A5.
  • Take away the lower bindings below your Audi A5.
  • Simultaneously, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Audi A5, follow the same method as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Audi A5 whether it is the front one or the rear one the approaches are just about the same and it is enough to be careful to make everything go well.

To discover more tips on the Audi A5, take a look at the Audi A5 category.