If you’re a bit of a handy person, you’re likely willing to take care of almost all of the maintenance to be done on your Audi A2, but some are more difficult than others and require the removal of body parts or components to access the component you want to work on. We would like to help you in this process. That’s why on this web page we are going to view how to remove the bumper from a Audi A2. This operation is not very difficult and you should have the ability to do it with few tools. For that, first we will see how to remove the front bumper of your Audi A2, then how to remove the rear bumper of this one.
How to remove the front bumper from a Audi A2
So let’s start our article content with the front bumper of your Audi A2. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to to be able to disassemble the bumper of your Audi A2 in good conditions:
- If you want to be more comfy, we recommend you to put your Audi A2 on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Audi A2. According to your automobile features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that seals the front bumper of your Audi A2 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go under your Audi A2 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Audi A2, to put it back in place stick to the steps in the opposite way.
How to remove the rear bumper from a Audi A2
And to finish, regardless if the operation is quite equivalent, we will take a look at the case of removing the rear bumper from your Audi A2. For each stage to avoid repeating ourselves we will only give you the broad highlights, read the part 1 if you have any concerns or questions for more information.
- Start with undertaking the same first stage, that is, lift your Audi A2 and remove your rear wheels to be able to have an ideal working space to remove the bumper of your Audi A2 without trouble
- Remove the rear wheel arches of your Audi A2 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it more convenient to remove the bumper from your Audi A2.
- Take out the lower bindings underneath your Audi A2.
- Simultaneously, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Audi A2, stick to the same method as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Audi A2 whether it is the front one or the rear one the techniques are practically the same and it is enough to be careful to make everything go well.
To get more tips on the Audi A2, take a look at the Audi A2 category.
