Wanting to fix the small fixes to be made to your car is turning out to be a lot more basic. In fact, the annual budget allocated to a car is significant, so attempting to fix it on your own appears to be a smart decision. It doesn’t matter if it’s to access your fuel pump, change your seat, wash a stain, or extraordinarily transport voluminous items, some of you are wondering how to remove the back seat on Toyota Sequoia. We will try in this post to tell you the different solutions depending on the year and series of your Toyota Sequoia.
How to remove the back seat on Toyota Sequoia with bolt system
Let’s start with the first situation. If you are trying to find a method to remove the rear seat of your Toyota Sequoia which is held only by 4 bolts, the procedure is likely the easiest. In fact, to achieve this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are found under the seat at the level of the passenger footwell. This will let you to entirely remove it from its fasteners and remove it.
How to remove the back seat Toyota Sequoia with clip system
Methodology now a little more long to achieve because we tend to be cautious of ties that are fixed in force, always scared to pull too strongly and destroy one. How do I remove the back seat of my Toyota Sequoia that has a clip system? In most cases these clips will be found under the seat, you will see them when you lift the seat of the bench. These clips are often consisting of a plastic part and a metal iron that clips into it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this technique does not work, generally pulling will be enough to release them.
How to remove the rear seat Toyota Sequoia with folding system with bolts only at the front
Finally, the last technique to take out the rear seat of your Toyota Sequoia, some years have a folding seat that is not fixed on the rear part, in this case, it is the simplest solution you can have to conduct. You will only need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Toyota Sequoia.
That’s it, now you should have all the info you need to remove the rear seat of your motor vehicle without problem. If you are trying to dismantle other parts like the bumper of your Toyota Sequoia, we have also made some articles to help you in these missions.
To get more tips on the Toyota Sequoia, take a look at the Toyota Sequoia category.
