Wanting to take care of the small fixes to be made to your vehicle is getting ever more regular. In fact, the annual budget allocated to a car is considerable, so attempting to repair it on your own seems a good options. Whether it’s to access your fuel pump, change your seat, wash a stain, or exceptionally transport heavy things, some of you are wondering how to remove the back seat on Toyota C-hr. We will try in this post to tell you the different ways depending on the year and series of your Toyota C-hr.

remove-back-seat-toyota-c-hr

How to remove the back seat on Toyota C-hr with bolt system

Let’s start with the first scenario. If you are interested in a method to remove the rear seat of your Toyota C-hr which is mounted only by 4 bolts, the solution is most certainly the easiest. In fact, to do so, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are found under the seat at the level of the passenger footwell. This will allow you to totally free it from its fasteners and take it off.

How to remove the back seat Toyota C-hr with clip system

Approach now a little more annoying because we tend to be cautious of ties that are fixed in force, typically afraid to pull too hard and break one. How do I remove the back seat of my Toyota C-hr that has a clip system? Generally these clips will be found under the seat, you will see them when you lift the seat of the bench. These clips are often composed of a plastic portion and a metal iron that clips into it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this technique doesn’t work, in most cases pulling will be enough to release them.

How to remove the rear seat Toyota C-hr with folding system with bolts only at the front

Finally, the last solution to remove the rear seat of your Toyota C-hr, some years have a folding seat that is not fixed on the rear part, in this case, it is the simplest solution you can have to realize. You will simply need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Toyota C-hr.
That’s it, now you should have all the information you need to remove the rear seat of your motor vehicle serenely. If you are looking to dismantle other parts like the bumper of your Toyota C-hr, we have also write some guides to help you in these quests.

To get more tips on the Toyota C-hr, take a look at the Toyota C-hr category.