Wanting to handle the small fixes to be made to your automobile is turning out to be more and more regular. In fact, the annual budget assigned to a car is important, so looking to repair it on your own appears to be a wise choice. Whether it’s to access your fuel pump, change your seat, wash a stain, or extraordinarily transport bulky things, some of you are thinking about how to remove the back seat on Jeep Wrangler. We will try in this article to present you the different solutions dependant on the year and series of your Jeep Wrangler.

remove-back-seat-jeep-wrangler

How to remove the back seat on Jeep Wrangler with bolt system

Let’s begin with the first situation. If you are interested in a technique to remove the rear seat of your Jeep Wrangler which is held only by 4 bolts, the technique is perhaps the simplest. In fact, to accomplish this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are based under the seat at the level of the passenger footwell. This will let you to entirely remove it from its fasteners and take it out.

How to remove the back seat Jeep Wrangler with clip system

Methodology now a little more difficult because we tend to be skeptical of ties that are fixed in force, always afraid to pull too strongly and break one. How do I remove the back seat of my Jeep Wrangler that has a clip system? Ordinarily these clips will be based under the seat, you will see them when you lift the seat of the bench. These clips are often consisting of a plastic portion and a metal iron that clips in it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this method doesn’t work, ordinarily pulling will be enough to release them.

How to remove the rear seat Jeep Wrangler with folding system with bolts only at the front

Finally, the last solution to remove the rear seat of your Jeep Wrangler, some years have a folding seat that is not fixed on the rear part, in such a case, it is the quickest solution you can have to realize. You will simply need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Jeep Wrangler.
That’s it, now you should have all the info you need to remove the rear seat of your motor vehicle without problem. If you are trying to dismantle other parts like the bumper of your Jeep Wrangler, we have also write some guides to help you in these quests.

If perhaps you have any additional questions about the Jeep Wrangler, do not hesitate to consult our Jeep Wrangler category.