Wanting to handle the small problems to be made to your vehicle is turning out to be more and more common. Indeed, the annual budget allocated to a car is substantial, so attempting to fix it without help appears to be a good solution. It doesn’t matter if it’s to access your fuel pump, change your seat, wash a stain, or exceptionally transport heavy things, some of you are wondering how to remove the back seat on Infiniti QX30. We will try on this page to give you the different ways dependant on the year and series of your Infiniti QX30.
How to remove the back seat on Infiniti QX30 with bolt system
Let’s start with the first scenario. If you are attempting to find a method to remove the rear seat of your Infiniti QX30 which is held just by 4 bolts, the technique is likely the easiest. Indeed, to achieve this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are based under the seat at the level of the passenger footwell. This will let you to completely release it from its fasteners and take it out.
How to remove the back seat Infiniti QX30 with clip system
Methodology now a little more difficult because we tend to be skeptical of ties that are fixed in force, generally afraid to pull too strongly and break one. How do I remove the back seat of my Infiniti QX30 that has a clip system? In most cases these clips will be based under the seat, you will see them when you lift the seat of the bench. These clips are often composed of a plastic portion and a metal iron that clips in it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this approach does not work, ordinarily pulling will be enough to release them.
How to remove the rear seat Infiniti QX30 with folding system with bolts only at the front
Finally, the last process to take off the rear seat of your Infiniti QX30, some years have a folding seat that is not fixed on the rear part, in such a case, it is the most simple method you can have to realise. You will only need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Infiniti QX30.
That’s it, now you should have all the details you need to remove the rear seat of your motor vehicle serenely. If you are trying to dismantle other parts like the bumper of your Infiniti QX30, we have also made some tutorials to help you in these missions.
If you wish more guides on the Infiniti QX30, go to our Infiniti QX30 category.
