Wanting to handle the small fixes to be made to your vehicle is getting a lot more regular. Indeed, the annual budget assigned to a car is important, so attempting to service it yourself appears to be a wise solution. Whether it’s to access your fuel pump, change your seat, wash a stain, or exceptionally transport voluminous objects, some of you are wanting to know how to remove the back seat on Hyundai Kona. We will try in this article to tell you the different ways dependant on the year and series of your Hyundai Kona.
How to remove the back seat on Hyundai Kona with bolt system
Let’s start with the first situation. If you are looking for a way to remove the rear seat of your Hyundai Kona which is held just by 4 bolts, the process is most certainly the simplest. Indeed, to achieve this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are based under the seat at the level of the passenger footwell. This will allow you to completely free it from its fasteners and take it away.
How to remove the back seat Hyundai Kona with clip system
Methodology now a bit more difficult because we tend to be skeptical of ties that are fixed in force, typically scared to pull too hard and break one. How do I remove the back seat of my Hyundai Kona that has a clip system? In most cases these clips will be based under the seat, you will see them when you lift the seat of the bench. These clips are often composed of a plastic portion and a metal iron that clips into it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this solution does not work, ordinarily pulling will be enough to release them.
How to remove the rear seat Hyundai Kona with folding system with bolts only at the front
Finally, the last process to take off the rear seat of your Hyundai Kona, some years have a folding seat that is not fixed on the rear part, in such a case, it is the quickest solution you can have to realise. You will only need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Hyundai Kona.
That’s it, now you should have all the information you need to remove the rear seat of your car without problem. If you are planning to dismantle other parts like the bumper of your Hyundai Kona, we have also write some tutorials to help you in these missions.
In the event that you have any additional questions about the Hyundai Kona, do not hesitate to consult our Hyundai Kona category.
