Wanting to take care of the small problems to be made to your motor vehicle is growing to be more and more common. In reality, the annual budget invested in a car is considerable, so planning to fix it on your own looks like a smart options. Regardless it’s to access your petrol station, change your seat, wash a stain, or exceptionally transport heavy stuff, some of you are thinking about how to remove the back seat on Hyundai Bayon. We will try in this article to present you the different ways dependant on the year and series of your Hyundai Bayon.
How to remove the back seat on Hyundai Bayon with bolt system
Let’s start with the first situation. If you are interested in a technique to remove the rear seat of your Hyundai Bayon which is fixed just by 4 bolts, the technique is most likely the most basic. In reality, to do so, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are located under the seat at the level of the passenger footwell. This will enable you to totally remove it from its fasteners and take it out.
How to remove the back seat Hyundai Bayon with clip system
Methodology now a bit more difficult because we tend to be wary of ties that are fixed in force, always afraid to pull too hard and destroy one. How do I remove the back seat of my Hyundai Bayon that has a clip system? In most cases these clips will be located under the seat, you will see them when you lift the seat of the bench. These clips are often consisting of a plastic part and a metal iron that clips in it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this method does not work, in most cases pulling will be enough to release them.
How to remove the rear seat Hyundai Bayon with folding system with bolts only at the front
Finally, the last approach to take off the rear seat of your Hyundai Bayon, some years have a folding seat that is not fixed on the rear part, in this instance, it is the quickest method you can have to achieve. You will simply need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Hyundai Bayon.
That’s it, now you should have all the information you need to remove the rear seat of your car without problem. If you are planning to dismantle other parts like the bumper of your Hyundai Bayon, we have also made some tutorials to help you in these quests.
Whenever you have any additional questions about the Hyundai Bayon, do not hesitate to consult our Hyundai Bayon category.
