Wanting to deal with the small maintenance to be made to your automobile is turning out to be a lot more regular. Indeed, the annual budget invested in a car is huge, so planning to repair it yourself seems to be a good decision. Whether it’s to access your fuel pump, change your seat, wash a stain, or extraordinarily transport bulky things, some of you are thinking about how to remove the back seat on Dodge Ram. We will try in this article to give you the different solutions depending on the year and series of your Dodge Ram.
How to remove the back seat on Dodge Ram with bolt system
Let’s start with the first scenario. If you are trying to find a technique to remove the rear seat of your Dodge Ram which is held only by 4 bolts, the procedure is most certainly the easiest. Indeed, to accomplish this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are located under the seat at the level of the passenger footwell. This will let you to totally release it from its fasteners and take it out.
How to remove the back seat Dodge Ram with clip system
Technique now a bit more annoying because we tend to be skeptical of ties that are fixed in force, typically afraid to pull too strongly and break one. How do I remove the back seat of my Dodge Ram that has a clip system? In general these clips will be located under the seat, you will see them when you lift the seat of the bench. These clips are often made up of a plastic portion and a metal iron that clips into it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this technique does not work, ordinarily pulling will be enough to release them.
How to remove the rear seat Dodge Ram with folding system with bolts only at the front
Finally, the last process to take out the rear seat of your Dodge Ram, some years have a folding seat that is not fixed on the rear part, in this instance, it is the simplest technique you can have to realize. You will simply need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Dodge Ram.
That’s it, now you should have all the info you need to remove the rear seat of your motor vehicle without problem. If you are seeking to dismantle other parts like the bumper of your Dodge Ram, we have also write some guides to help you in these tasks.
If perhaps you have any additional questions about the Dodge Ram, do not hesitate to consult our Dodge Ram category.
