Wanting to fix the small problems to be made to your car is becoming more and more common. Indeed, the annual budget allocated to a car is substantial, so wishing to repair it without help seems a wise choice. It doesn’t matter if it’s to access your fuel pump, change your seat, wash a stain, or exceptionally transport heavy stuff, some of you are wanting to know how to remove the back seat on Citroen Jumper 2. We will try on this page to tell you the different ways depending on the year and series of your Citroen Jumper 2.
How to remove the back seat on Citroen Jumper 2 with bolt system
Let’s begin with the first scenario. If you are trying to find a technique to remove the rear seat of your Citroen Jumper 2 which is fixed just by 4 bolts, the process is likely the most simple. Indeed, to do so, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are located under the seat at the level of the passenger footwell. This will let you to completely remove it from its fasteners and take it out.
How to remove the back seat Citroen Jumper 2 with clip system
Approach now a bit more difficult because we tend to be skeptical of ties that are fixed in force, always scared to pull too hard and destroy one. How do I remove the back seat of my Citroen Jumper 2 that has a clip system? In general these clips will be located under the seat, you will see them when you lift the seat of the bench. These clips are often consisting of a plastic portion and a metal iron that clips in it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this approach doesn’t work, in general pulling will be enough to release them.
How to remove the rear seat Citroen Jumper 2 with folding system with bolts only at the front
Finally, the last approach to take out the rear seat of your Citroen Jumper 2, some years have a folding seat that is not fixed on the rear part, in this case, it is the easiest solution you can have to realise. You will just need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Citroen Jumper 2.
That’s it, now you should have all the information you need to remove the rear seat of your car serenely. If you are planning to dismantle other parts like the bumper of your Citroen Jumper 2, we have also made some tutorials to help you in these missions.
If you need more tutorials on the Citroen Jumper 2, go to our Citroen Jumper 2 category.
