Wanting to deal with the small fixes to be made to your car is starting to be ever more common. In reality, the annual budget assigned to a car is considerable, so seeking to fix it on your own seems a smart choice. Regardless it’s to access your petrol station, change your seat, wash a stain, or extraordinarily transport heavy stuff, some of you are thinking about how to remove the back seat on Chrysler 200. We will try in this post to provide you the different ways depending on the year and series of your Chrysler 200.
How to remove the back seat on Chrysler 200 with bolt system
Let’s begin with the first situation. If you are trying to find a technique to remove the rear seat of your Chrysler 200 which is mounted only by 4 bolts, the procedure is most likely the most simple. In reality, to do so, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are located under the seat at the level of the passenger footwell. This will allow you to completely free it from its fasteners and take it out.
How to remove the back seat Chrysler 200 with clip system
Approach now a bit more difficult because we tend to be wary of ties that are fixed in force, typically afraid to pull too strongly and destroy one. How do I remove the back seat of my Chrysler 200 that has a clip system? Ordinarily these clips will be located under the seat, you will see them when you lift the seat of the bench. These clips are often composed of a plastic part and a metal iron that clips in it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this solution doesn’t work, ordinarily pulling will be enough to release them.
How to remove the rear seat Chrysler 200 with folding system with bolts only at the front
Finally, the last technique to take out the rear seat of your Chrysler 200, some years have a folding seat that is not fixed on the rear part, in such a case, it is the simplest option you can have to achieve. You will only need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Chrysler 200.
That’s it, now you should have all the info you need to remove the rear seat of your motor vehicle without problem. If you are seeking to dismantle other parts like the bumper of your Chrysler 200, we have also made some articles to help you in these quests.
If perhaps you have any additional questions about the Chrysler 200, do not hesitate to consult our Chrysler 200 category.
