We all have concerns with our motor vehicle at some point, regardless it’s because you run out of gas, have a fuse issue, or your car doesn’t want to start, all these malfunctions often bother us and we are ordinarily powerless to manage them. That’s why all of us tries its best to accompany you in front of these problems, and in this article we will try to show you how to lock your Toyota Tacoma with a dead battery? In reality, if you have no more electric power, you will not have the ability to use the central locking of your car anymore. We will first demonstrate how to roll up a window of a Toyota Tacoma with a dead battery, and secondly, how to lock the doors of your Toyota Tacoma without battery.
How to roll up a window from an Toyota Tacoma with a dead battery?
So we will start our article with the methodology to allow you to close your Toyota Tacoma with no power and more precisely the window of this one. Regardless your battery is empty, or you have taken off the battery, you will not have access to the electric controls of your Toyota Tacoma, and therefore no longer have the opportunity to close the electric windows of your Toyota Tacoma. Sadly you don’t have many choices to allow you to close them, in reality, closing the electric window of a Toyota Tacoma without battery is impossible , without energy you don’t have the possibility to use the mechanisms of your window lifter, and regardless if you remove the trim of your door and try to reassemble the window manually you risk to break the motor of the window lifter of your Toyota Tacoma. If it turns out, on the other hand, the window of your Toyota Tacoma is stuck although you have battery power, please refer to this guideline to find a remedy to your issue. Here are the only two solutions that we can recommend, even though they are quite logical:
- Get a new battery for your Toyota Tacoma and change it , which will re-power all the electrical organs of the Toyota Tacoma and thus your window lifter mechanisms. If you are looking to disconnect the battery from your Toyota Tacoma, do not hesitate to read our guideline to perform this process.
- Find a vehicle that has battery power and connect your two batteries with jump start wire to recharge the battery and allow you to close the windows of your Toyota Tacoma
.
How to close the doors on a Toyota Tacoma with a dead battery?
And now, we will certainly go forward to the part that interests you the more, how to close Toyota Tacoma doors with no power, nevertheless this time we will focus on the doors of this one. In reality, your car may be out of battery in front of your house, you been able to open the doors and try to start it, but while waiting to find a solution you want to be sure that no one will have the opportunity to get inside. Sadly, it’s pretty much the same issue as with the windows of your Toyota Tacoma. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press by hand to close your Toyota Tacoma without power, but this is less and less the case. So we will give you as before the only two alternatives to allow you to close your car without energy:
- Get a new battery and install it to close the doors of your Toyota Tacoma, or find one in good condition. However, you will need access to the bonnet to do so
- Connect your Toyota Tacoma to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any questions about your battery’s ability to keep the charge. Make sure to close the doors of your car while it is still connected to the other car. Once you have done this, you can disconnect your battery and close your bonnet
.
If you wish more guides on the Toyota Tacoma, go to our Toyota Tacoma category.
