We all have problems with our motor vehicle sooner or later, it doesn’t matter if it’s because you run out of gas, have a fuse trouble, or your car doesn’t want to start, all these breakdowns are likely to bother us and we are in most cases powerless to deal with them. That’s why we tries its best to help you in front of these concerns, and in this article we will make sure to describe you how to lock your Subaru Legacy with a dead battery? In reality, if you have no more electric power, you will not be able to use the central locking of your car any longer. We will first demonstrate how to roll up a window of a Subaru Legacy with a dead battery, and secondly, how to lock the doors of your Subaru Legacy without battery.
How to roll up a window from an Subaru Legacy with a dead battery?
So we will commence our article with the technique to let you to close your Subaru Legacy with no power and more precisely the window of this one. It doesn’t matter if your battery is out of power, or you have taken off the battery, you will not have access to the electric controls of your Subaru Legacy, and therefore no longer have the opportunity to close the electric windows of your Subaru Legacy. Regrettably you don’t have many possibilities to let you to close them, in fact, closing the electric window of a Subaru Legacy without battery is hopeless , without energy you don’t have the possibility to run the mechanisms of your window lifter, and whether or not you remove the trim of your door and try to reassemble the window manually you risk to destroy the motor of the window lifter of your Subaru Legacy. If it turns out, on the other hand, the window of your Subaru Legacy is stuck whilst you have battery power, please relate to this instruction to get a remedy to your trouble. Here are the only two solutions that we can recommend, although they are quite logical:
- Purchase a new battery for your Subaru Legacy and change it , which will re-power all the electrical parts of the Subaru Legacy and thus your window lifter mechanisms. If you are looking to disconnect the battery from your Subaru Legacy, do not be reluctant to read our guide to perform this action.
- Find a automobile that has battery power and connect your two batteries with jump start wire to recharge the battery and let you to close the windows of your Subaru Legacy
.
How to close the doors on a Subaru Legacy with a dead battery?
And now, we will surely move on to the section that interests you the more, how to close Subaru Legacy doors with no power, nevertheless this time we will concentrate on the doors of this one. In reality, your car may be out of battery in front of your house, you managed to open the doors and try to start it, but while waiting to find an answer you want to ensure that nobody else will be able to get inside. Regrettably, it’s pretty much the same trouble as with the windows of your Subaru Legacy. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press by hand to close your Subaru Legacy without power, but this is less and less the case. So we will give you as before the only two possibilities to allow you to close your car without energy:
- Purchase a new battery and fit it to close the doors of your Subaru Legacy, or find one in good condition. However, you will need access to the bonnet to do so
- Connect your Subaru Legacy to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any doubts about your battery’s ability to keep the charge. Make sure you close the doors of your car while it is still linked to the other vehicle. Once you have finished this, you can disconnect your battery and close your bonnet
.
To discover more tips on the Subaru Legacy, take a look at the Subaru Legacy category.
