We all have problems with our motor vehicle at some point, regardless it’s because you run out of gas, have a fuse problem, or your car won’t start, all these breakdowns often embarrass us and we are often incapable to fix them. That’s why we tries its best to accompany you in front of these concerns, and on this page we will make sure to explain you how to close your Mercury Milan with a dead battery? In fact, if you have no more electric power, you will not be capable to use the central locking of your car anymore. We will first describe how to roll up a window of a Mercury Milan with a dead battery, and secondly, how to close the doors of your Mercury Milan without battery.

lock-dead-battery-mercury-milan

How to roll up a window from an Mercury Milan with a dead battery?

So we will begin our article content with the procedure to allow you to close your Mercury Milan with no power and more precisely the window of this one. It doesn’t matter if your battery is out of power, or you have taken off the battery, you will not have access to the electric controls of your Mercury Milan, and therefore no longer have the chance to close the electric windows of your Mercury Milan. Regrettably you don’t have many alternatives to allow you to close them, in fact, closing the electric window of a Mercury Milan without battery is unachievable , with no power you don’t have the possibility to use the systems of your window lifter, and whether or not you remove the trim of your door and try to reassemble the window manually you risk to break the motor of the window lifter of your Mercury Milan. If, on the other hand, the window of your Mercury Milan is stuck while you have battery power, make sure you refer to this guide to find a solution to your problem. Here are the only two answers that we can suggest, even though they are quite logical:

  • Acquire a new battery for your Mercury Milan and swap it , which will re-power all the electrical parts of the Mercury Milan and thus your window lifter systems. If you are looking to disconnect the battery from your Mercury Milan, do not think twice to consult our article to execute this action.
  • Find a car that has battery power and connect your two batteries with jump start wire to recharge the battery and allow you to close the windows of your Mercury Milan

.

How to close the doors on a Mercury Milan with a dead battery?

And now, we will certainly go forward to the part that interests you the most, how to close Mercury Milan doors with no power, nevertheless this time we will focus on the doors of this one. In fact, your car may be out of battery in front of your house, you were able to open the doors and try to start it, but while waiting to find an alternative you want to be certain that nobody else will have the opportunity to get inside. Regrettably, it’s pretty much the same problem as with the windows of your Mercury Milan. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press manually to close your Mercury Milan without power, but this is less and less the case. So we will give you as before the only two solutions to allow you to close your car without energy:

  • Acquire a new battery and install it to close the doors of your Mercury Milan, or find one in good condition. Nevertheless, you will need access to the bonnet to do so
  • Connect your Mercury Milan to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any uncertainties about your battery’s ability to keep the charge. Make sure to close the doors of your car while it is still linked to the other vehicle. Once you have done this, you can disconnect your battery and close your bonnet

.

To find more tips on the Mercury Milan, take a look at the Mercury Milan category.