We all have problems with our car sooner or later, it doesn’t matter if it’s because you run out of gas, have a fuse trouble, or your car won’t start, all these breakdowns commonly bother us and we are in most cases powerless to fix them. That’s why we tries its best to help you in front of these problems, and in this article we will try to describe you how to lock your Jeep Liberty with a dead battery? In fact, if you have no more electricity, you will not be capable to use the central locking of your car anymore. We will first teach you how to roll up a window of a Jeep Liberty with a dead battery, and secondly, how to lock the doors of your Jeep Liberty without battery.

lock-dead-battery-jeep-liberty

How to roll up a window from an Jeep Liberty with a dead battery?

So we will commence our content page with the solution to enable you to close your Jeep Liberty with no power and more specifically the window of this one. Whether your battery is out of power, or you have removed the battery, you will not have access to the electric controls of your Jeep Liberty, and therefore no longer have the chance to close the electric windows of your Jeep Liberty. Unfortunately you don’t have many choices to enable you to close them, indeed, closing the electric window of a Jeep Liberty without battery is unachievable , without energy you don’t have the possibility to operate the mechanisms of your window lifter, and regardless if you remove the trim of your door and try to reassemble the window manually you risk to break the motor of the window lifter of your Jeep Liberty. If it turns out, on the other hand, the window of your Jeep Liberty is stuck whilst you have battery power, make sure you refer to this instruction to get a solution to your trouble. Here are the only two possibilities that we can suggest, even though they are quite logical:

  • Acquire a new battery for your Jeep Liberty and change it , which will re-power all the electrical parts of the Jeep Liberty and thus your window lifter mechanisms. If you are planning to disconnect the battery from your Jeep Liberty, do not think twice to browse our article to carry out this operation.
  • Find a car that has battery power and connect your two batteries with jump start wire to recharge the battery and enable you to close the windows of your Jeep Liberty

.

How to close the doors on a Jeep Liberty with a dead battery?

And now, we will certainly advance to the part that interests you the most, how to close Jeep Liberty doors with no power, nevertheless this time we will concentrate on the doors of this one. In fact, your car may be out of battery in front of your house, you handled to open the doors and try to start it, but while waiting to find an answer you want to be certain that nobody else will be able to get inside. Unfortunately, it’s pretty much the same trouble as with the windows of your Jeep Liberty. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press manually to close your Jeep Liberty without power, but this is less and less the case. So we will give you as before the only two possibilities to allow you to close your car without energy:

  • Acquire a new battery and install it to close the doors of your Jeep Liberty, or find one in good condition. However, you will need access to the bonnet to do so
  • Connect your Jeep Liberty to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any questions about your battery’s ability to keep the charge. Make sure to close the doors of your car while it is still linked to the other vehicle. Once you have achieved this, you can disconnect your battery and close your bonnet

.

If you need more tutorials on the Jeep Liberty, go to our Jeep Liberty category.