We all have concerns with our vehicle sooner or later, whether it’s because you run out of gas, have a fuse trouble, or your car doesn’t want to start, all these malfunctions are likely to embarrass us and we are ordinarily incapable to manage them. That’s why our team tries its best to accompany you in front of these complications, and in this article we will try to teach you how to lock your Jeep Gladiator with a dead battery? In reality, if you have no more electricity, you will not have the ability to use the central locking of your car anymore. We will first teach you how to roll up a window of a Jeep Gladiator with a dead battery, and secondly, how to lock the doors of your Jeep Gladiator without battery.

lock-dead-battery-jeep-gladiator

How to roll up a window from an Jeep Gladiator with a dead battery?

So we will begin our article content with the technique to enable you to close your Jeep Gladiator with no power and more exactly the window of this one. Whether your battery is out of power, or you have removed the battery, you will not have access to the electric controls of your Jeep Gladiator, and therefore no longer have the chance to close the electric windows of your Jeep Gladiator. Unfortunately you don’t have many choices to enable you to close them, indeed, closing the electric window of a Jeep Gladiator without battery is hopeless , without energy you don’t have the possibility to operate the systems of your window lifter, and regardless if you remove the trim of your door and try to reassemble the window manually you risk to destroy the motor of the window lifter of your Jeep Gladiator. In the event that, on the other hand, the window of your Jeep Gladiator is stuck although you have battery power, please refer to this instruction to find a remedy to your trouble. Here are the only two solutions that we can recommend, although they are quite logical:

  • Get a new battery for your Jeep Gladiator and swap it , which will re-power all the electrical parts of the Jeep Gladiator and thus your window lifter systems. If you are planning to disconnect the battery from your Jeep Gladiator, do not think twice to browse our guide to carry out this process.
  • Find a vehicle that has battery power and connect your two batteries with jump start wire to recharge the battery and enable you to close the windows of your Jeep Gladiator

.

How to close the doors on a Jeep Gladiator with a dead battery?

And now, we will certainly go forward to the part that interests you the more, how to close Jeep Gladiator doors with no power, nevertheless this time we will focus on the doors of this one. In reality, your car may be out of battery in front of your house, you managed to open the doors and try to start it, but while waiting to find a solution you want to make sure that nobody else will have the ability to get inside. Unfortunately, it’s pretty much the same trouble as with the windows of your Jeep Gladiator. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press by hand to close your Jeep Gladiator without power, but this is less and less the case. So we will give you as before the only two answers to allow you to close your car without energy:

  • Get a new battery and fit it to close the doors of your Jeep Gladiator, or find one in good condition. But, you will need access to the bonnet to do so
  • Connect your Jeep Gladiator to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any worries about your battery’s ability to keep the charge. Make sure to close the doors of your car while it is still linked to the other car. Once you have done this, you can disconnect your battery and close your bonnet

.

If you wish more tutorials on the Jeep Gladiator, go to our Jeep Gladiator category.