We all have trouble with our vehicle sooner or later, it doesn’t matter if it’s because you run out of gas, have a fuse trouble, or your car won’t start, all these malfunctions tend to annoy us and we are generally powerless to handle them. That’s why our team tries its best to accompany you in front of these complications, and today we will try to teach you how to lock your Chevrolet Trax with a dead battery? Indeed, if you have no more power, you will not be capable to use the central locking of your car anymore. We will first explain how to roll up a window of a Chevrolet Trax with a dead battery, and secondly, how to lock the doors of your Chevrolet Trax without battery.

lock-dead-battery-chevrolet-trax

How to roll up a window from an Chevrolet Trax with a dead battery?

So we will start our article with the solution to enable you to close your Chevrolet Trax with no power and more precisely the window of this one. Regardless whether your battery is out of power, or you have removed the battery, you will not have access to the electric controls of your Chevrolet Trax, and therefore no longer have the possibility to close the electric windows of your Chevrolet Trax. Regrettably you don’t have many solutions to enable you to close them, indeed, closing the electric window of a Chevrolet Trax without battery is hopeless , with no power you don’t have the possibility to run the mechanisms of your window lifter, and whether or not you remove the trim of your door and try to reassemble the window manually you risk to destroy the motor of the window lifter of your Chevrolet Trax. In cases where, on the other hand, the window of your Chevrolet Trax is stuck although you have battery power, make sure you relate to this guide to find a solution to your trouble. Here are the only two answers that we can suggest, even though they are quite logical:

  • Acquire a new battery for your Chevrolet Trax and change it , which will re-power all the electrical parts of the Chevrolet Trax and thus your window lifter mechanisms. If you are looking to disconnect the battery from your Chevrolet Trax, do not hesitate to browse our guide to execute this process.
  • Find a motor vehicle that has battery power and connect your two batteries with jump start wire to recharge the battery and enable you to close the windows of your Chevrolet Trax

.

How to close the doors on a Chevrolet Trax with a dead battery?

And now, we will surely advance to the section that interests you the more, how to close Chevrolet Trax doors with no power, but this time we will focus on the doors of this one. Indeed, your car may be out of battery in front of your house, you been able to open the doors and try to start it, but while waiting to find a remedy you want to make sure that nobody else will be able to get inside. Regrettably, it’s pretty much the same trouble as with the windows of your Chevrolet Trax. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press by hand to close your Chevrolet Trax without power, but this is less and less the case. So we will give you as before the only two possibilities to allow you to close your car without energy:

  • Acquire a new battery and fit it to close the doors of your Chevrolet Trax, or find one in good condition. But, you will need access to the bonnet to do so
  • Connect your Chevrolet Trax to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any questions about your battery’s ability to keep the charge. Make sure to close the doors of your car while it is still linked to the other vehicle. Once you have done this, you can disconnect your battery and close your bonnet

.

If you have any further questions about the Chevrolet Trax, do not hesitate to consult our Chevrolet Trax category.