Modern cars all come with an incredible quantity of technology, nevertheless, due to your budget or the year of your Volkswagen Transporter, you may not be fortunate enough to have them all. On this page we’re going to help you solve this problem by explaining how to install parking sensor on my Volkswagen Transporter? In reality, this option is highly efficient, especially if you live in the city and have to park often in narrow parking spaces. To help you out, we’ll first look at how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Volkswagen Transporter, and at last, how much does a parking sensor cost?
How does parking sensors operate on an Volkswagen Transporter?
So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting option allows you to know the distance between the back of your Volkswagen Transporter and an obstacle when you maneuver. It is consequently particularly legitimate for drivers who have to maneuver on a regular basis, whose field of vision is bad, or whose car size is big.
Nearly always fitted as standard, the reverse sensors of a Volkswagen Transporter include a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and estimate the distance between the obstacle and the radar. Ordinarily you will have a sound indicator in the cabin which will rise in intensity with the closeness of the obstacle and in some models a visual indicator in complement. The reversing radars of a Volkswagen Transporter will help you for parking, but as well for safety and keeping away from pedestrians.
How to install parking sensors on a Volkswagen Transporter?
We now proceed to the step that you are probably most intrigued by, installing reverse parking sensors on a Volkswagen Transporter. This section is for you if you don’t have a standard reserve sensor set up and you still want to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen Transporter.
How to replace a faulty backup sensors on a Volkswagen Transporter
First we’ll see how to replace a faulty parking sensor on an Volkswagen Transporter. If it turns out your Volkswagen Transporter has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function properly. Thankfully for you this process is particularly simple, you can even make it out yourself without any specified mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take off the broken parking sensor from your Volkswagen Transporter, this stage is fairly intuitive, it is only clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s functioning properly.
- You will just need to stick to the installation instructions, but we summarize here the main basic steps.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Follow the installation owners manual which is accessible with some electrical knowledges.
- Find the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Volkswagen Transporter
Now we go forward to the section you’re most likely most intrigued by, how to install a reverse sensor set up on a Volkswagen Transporter that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now deal aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will certainly have to remove the bumper of your Volkswagen Transporter for the set up, do not be reluctant to browse our content page on this subject to discover the procedure to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Volkswagen Transporter
And at last, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Transporter. There are two sort, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Volkswagen Transporter?
Price of changing a faulty reversing parking sensor for an Volkswagen Transporter
The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count about one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Volkswagen Transporter
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high class package.
Price of a parking sensors kit without drilling for a Volkswagen Transporter
.
To conclude, for the price of a reversing radar without drilling for your Volkswagen Transporter, no matter what version you select, you will have to pay between 30 and 60 euros.
If you want more guides on the Volkswagen Transporter, go to our Volkswagen Transporter category.
