Modern cars all come with an impressive quantity of technology, however, due to your budget or the year of your Volkswagen T-Cross, you may not be sufficiently fortunate to have them all. Today we’re gonna help you correct this situation by explaining how to install parking sensor on my Volkswagen T-Cross? In fact, this feature is highly handy, particularly if you live in the city and have to park on the regular basis in narrow parking areas. To help you out, we’ll first view how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Volkswagen T-Cross, and to finish, how much does a parking sensor cost?
How does parking sensors operate on an Volkswagen T-Cross?
So we start with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Volkswagen T-Cross and an obstacle when you maneuver. It is therefore especially logical for people who have to maneuver frequently, whose field of vision is poor, or whose car size is large.
Nearly always installed as standard, the reverse sensors of a Volkswagen T-Cross include a set of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound warning in the cabin which will increase in level with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Volkswagen T-Cross will help you for parking, but also for security and keeping away from pedestrians.
How to install parking sensors on a Volkswagen T-Cross?
We now go forward to the section that you are quite likely most interested in, installing reverse parking sensors on a Volkswagen T-Cross. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Volkswagen T-Cross.
How to replace a broken backup sensors on a Volkswagen T-Cross
First we’ll see how to replace a broken parking sensor on an Volkswagen T-Cross. In cases where your Volkswagen T-Cross has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function correctly. Luckily for you this process is extremely simple, you can even make it out yourself without any particular mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take off the broken parking sensor from your Volkswagen T-Cross, this step is extremely intuitive, it is just clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating correctly.
- You will simply need to follow the installation guidelines, but we summarize here the main basic steps.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Adhere to the installation manual which is accessible with some electrical knowledges.
- Identify the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an Volkswagen T-Cross
Now we go forward to the part you’re most certainly most interested in, how to install a reverse sensor set up on a Volkswagen T-Cross that doesn’t have one? As we said earlier on, you’re lucky because a good number of OEMs now provide automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is imperative to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will surely have to remove the bumper of your Volkswagen T-Cross for the set up, do not be reluctant to consult our document on this subject to discover the process to follow. If you don’t feel like it, you can call a workshop, the operation should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Volkswagen T-Cross
And to finish, we will now present you the installation of a drill-free parking sensors system on a Volkswagen T-Cross. There are two options, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Volkswagen T-Cross?
Price of replacing a broken reversing parking sensor for an Volkswagen T-Cross
The replacement of a broken reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is required to count about one hundred euros for the installation of the kit by a workshop.
Price of an ultrasonic parking sensors with drilling for Volkswagen T-Cross
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a good quality system.
Price of a parking sensors kit without drilling for a Volkswagen T-Cross
.
To finish, for the price of a reversing radar without drilling for your Volkswagen T-Cross, no matter what version you go for, you will have to pay between 30 and 60 euros.
If you need more guides on the Volkswagen T-Cross, go to our Volkswagen T-Cross category.
