Recent cars all come with an incredible number of options, but, because of your budget or the year of your Volkswagen Rabbit, you may not be fortunate enough to have them all. In this article we’re gonna help you resolve this concern by telling you how to install parking sensor on my Volkswagen Rabbit? Indeed, this feature is highly useful, especially if you live in the city and have to park your car often in narrow parking areas. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Volkswagen Rabbit, and finally, how much does a parking sensor cost?
How does parking sensors work on an Volkswagen Rabbit?
So we start with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature allows you to know the distance between the back of your Volkswagen Rabbit and an obstacle when you maneuver. It is as a result particularly good for people who have to maneuver regularly, whose visibility is poor, or whose vehicle size is large.
In many cases fitted as standard, the reverse sensors of a Volkswagen Rabbit incorporate a kit of sensors (minimum 4) that will be turned on with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will rise in intensity with the proximity of the obstacle and in some cases a visual indicator in complement. The reversing radars of a Volkswagen Rabbit will enable you for parking, but as well for security and keeping away from pedestrians.
How to install parking sensors on a Volkswagen Rabbit?
We now proceed to the part that you are most likely most interested in, fitting reverse parking sensors on a Volkswagen Rabbit. This section is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen Rabbit.
How to replace a defective backup sensors on a Volkswagen Rabbit
First we’ll see how to replace a defective parking sensor on an Volkswagen Rabbit. In the event that your Volkswagen Rabbit has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function correctly. Fortunately for you this operation is particularly simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take out the broken parking sensor from your Volkswagen Rabbit, this stage is fairly intuitive, it is simply clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating correctly.
- You will just need to stick to the installation recommendations, but we summarize here the main procedures.
- Take out the bumper if you don’t have access to the inside of it.
- Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Give it a try all out.
- Stick to the installation instructions which is accessible with some electrical knowledges.
- Locate the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Volkswagen Rabbit
Now we advance to the section you’re almost certainly most interested in, how to install a reverse sensor set up on a Volkswagen Rabbit that doesn’t have one? As we mentioned earlier on, you’re lucky because a good number of OEMs now deal aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will certainly have to remove the bumper of your Volkswagen Rabbit for the installation, do not hesitate to consult our content page on this subject to learn the process to follow. If you don’t feel like it, you can call a specialist, the procedure should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Volkswagen Rabbit
And finally, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Rabbit. There are two types, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Volkswagen Rabbit?
Price of swapping a defective reversing parking sensor for an Volkswagen Rabbit
The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count approximately one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Volkswagen Rabbit
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a good quality set up.
Price of a parking sensors kit without drilling for a Volkswagen Rabbit
.
At last, for the price of a reversing radar without drilling for your Volkswagen Rabbit, whatever version you go for, you will have to spend between 30 and 60 euros.
To discover more tips on the Volkswagen Rabbit, take a look at the Volkswagen Rabbit category.
