Recent cars all come with an astounding number of options, nevertheless, because of your budget or the year of your Volkswagen Polo, you may not be lucky enough to have them all. On this page we’re going to help you correct this situation by detailing how to install parking sensor on my Volkswagen Polo? In fact, this option is highly helpful, especially if you live in the city and have to park your car regularly in narrow parking areas. To help you out, we’ll first check out how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Volkswagen Polo, and to conclude, how much does a parking sensor cost?

install-parking-sensors-volkswagen-polo

How does parking sensors operate on an Volkswagen Polo?

So we start with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option allows you to know the distance between the back of your Volkswagen Polo and an obstacle when you move back. It is therefore specifically good for drivers who have to maneuver frequently, whose visibility is bad, or whose vehicle size is huge.
Often times installed as standard, the reverse sensors of a Volkswagen Polo consist of a set of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. In most cases you will have a sound signal in the cabin which will rise in strength with the proximity of the obstacle and in some cases a visual sign in complement. The reversing radars of a Volkswagen Polo will help you for parking, but as well for safety and avoiding pedestrians.

How to install parking sensors on a Volkswagen Polo?

We now proceed to the step that you are likely most interested in, fitting reverse parking sensors on a Volkswagen Polo. This section is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Volkswagen Polo.

How to change a broken backup sensors on a Volkswagen Polo

First we’ll see how to change a broken parking sensor on an Volkswagen Polo. If your Volkswagen Polo has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be replaced to let the system to function effectively. Good thing for you this operation is very simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the destroyed parking sensor from your Volkswagen Polo, this part is fairly intuitive, it is only clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Volkswagen Polo

    Now we move on to the section you’re almost certainly most interested in, how to install a reverse sensor set up on a Volkswagen Polo that doesn’t have one? As we explained above, you’re lucky because many of OEMs now deal auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these versions in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Volkswagen Polo for the installation, do not hesitate to consult our document on this subject to discover the procedure to follow. If you don’t feel like it, you can call a workshop, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation instructions, but we summarize here the main procedures.
    • Take out the bumper if you don’t have access to the inside of it.
    • Think about the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Volkswagen Polo

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Polo. There are two kind, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation manual which is accessible with some electrical bases.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Volkswagen Polo?

        Price of swapping a broken reversing parking sensor for an Volkswagen Polo

        The replacement of a broken reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count about one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Volkswagen Polo

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high class set up.

        Price of a parking sensors kit without drilling for a Volkswagen Polo

        .
        Finally, for the price of a reversing radar without drilling for your Volkswagen Polo, whatever type you choose, you will have to pay among 30 and 60 euros.

        If you need more tutorials on the Volkswagen Polo, go to our Volkswagen Polo category.