Recent cars all come with an incredible number of options, but, due to your budget or the year of your Volkswagen Crafter, you may not be fortunate enough to have them all. In this article we’re going to help you solve this problem by detailing how to install parking sensor on my Volkswagen Crafter? In fact, this feature is highly helpful, particularly if you live in the city and have to park frequently in narrow parking spots. To help you out, we’ll first check out how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Volkswagen Crafter, and to finish, how much does a parking sensor cost?

install-parking-sensors-volkswagen-crafter

How does parking sensors work on an Volkswagen Crafter?

So we start with the functioning of a parking sensor. As we told you in the intro, this particularl interesting feature enables you to know the distance between the back of your Volkswagen Crafter and an obstacle when you move back. It is therefore especially honest for people who have to maneuver on a regular basis, whose field of vision is poor, or whose car size is huge.
In many cases installed as standard, the reverse sensors of a Volkswagen Crafter is made up of a kit of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound signal in the cabin which will increase in level with the closeness of the obstacle and in some models a visual indicator in complement. The reversing radars of a Volkswagen Crafter will enable you for parking, but as well for safety and staying away from pedestrians.

How to install parking sensors on a Volkswagen Crafter?

We now advance to the section that you are most certainly most excited about, installing reverse parking sensors on a Volkswagen Crafter. This section is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen Crafter.

How to replace a malfunctioning backup sensors on a Volkswagen Crafter

First we’ll see how to replace a malfunctioning parking sensor on an Volkswagen Crafter. If it turns out your Volkswagen Crafter has suffered a rear shock and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function correctly. Good thing for you this procedure is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the damaged parking sensor from your Volkswagen Crafter, this part is extremely intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning correctly.
  • How to install an aftermarket parking sensor kit on an Volkswagen Crafter

    Now we proceed to the section you’re quite likely most excited about, how to install a reverse sensor set up on a Volkswagen Crafter that doesn’t have one? As we said earlier, you’re lucky because many of OEMs now deal aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Volkswagen Crafter for the set up, do not be reluctant to browse our article content on this subject to discover the procedure to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to adhere to the installation guidance, but we summarize here the main steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Volkswagen Crafter

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Crafter. There are two options, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation owners manual which is accessible with some electrical knowledges.
      • Find the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Volkswagen Crafter?

        Price of changing a malfunctioning reversing parking sensor for an Volkswagen Crafter

        The replacement of a broken reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count around one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Volkswagen Crafter

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable set up.

        Price of a parking sensors kit without drilling for a Volkswagen Crafter

        .
        At last, for the price of a reversing radar without drilling for your Volkswagen Crafter, no matter what type you go for, you will have to spend between 30 and 60 euros.

        If you need more guides on the Volkswagen Crafter, go to our Volkswagen Crafter category.