Modern cars all come with an astounding quantity of technology, however, by reason of your budget or the year of your Volkswagen Crafter 2, you may not be sufficiently lucky to have them all. In this article we’re gonna help you solve this problem by showing how to install parking sensor on my Volkswagen Crafter 2? Indeed, this feature is highly useful, particularly if you live in the city and have to park on the regular basis in narrow parking spaces. To help you out, we’ll first check out how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Volkswagen Crafter 2, and finally, how much does a parking sensor cost?
How does parking sensors function on an Volkswagen Crafter 2?
So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature allows you to know the distance between the back of your Volkswagen Crafter 2 and an obstacle when you maneuver. It is as a consequence especially honest for people who have to maneuver on a regular basis, whose field of vision is poor, or whose car size is big.
Frequently installed as standard, the reverse sensors of a Volkswagen Crafter 2 consist of a set of sensors (minimum 4) that will be turned on with reverse gear and will spot obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will increase in strength with the proximity of the obstacle and in some cases a visual sign in complement. The reversing radars of a Volkswagen Crafter 2 will help you for parking, but as well for security and staying away from pedestrians.
How to install parking sensors on a Volkswagen Crafter 2?
We now move on to the step that you are almost certainly most focused on, installing reverse parking sensors on a Volkswagen Crafter 2. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Volkswagen Crafter 2.
How to change a damaged backup sensors on a Volkswagen Crafter 2
First we’ll see how to change a damaged parking sensor on an Volkswagen Crafter 2. If it turns out your Volkswagen Crafter 2 has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to allow the system to function properly. Fortunately for you this process is particularly simple, you can even make it out yourself without any specified mechanical skill:
- Get a replacement unit radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take out the damaged parking sensor from your Volkswagen Crafter 2, this stage is very intuitive, it is simply clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating properly.
- You will only need to follow the installation guidelines, but we summarize here the main procedures.
- Take out the bumper if you don’t have access to the inside of it.
- Reflect on the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Stick to the installation owners manual which is accessible with some electrical knowledges.
- Find the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Volkswagen Crafter 2
Now we proceed to the part you’re likely most focused on, how to install a reverse sensor set up on a Volkswagen Crafter 2 that doesn’t have one? As we revealed earlier on, you’re lucky because many of OEMs now sell auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Volkswagen Crafter 2 for the installation, do not be reluctant to read our content on this subject matter to learn the process to follow. If you don’t feel like it, you can call a workshop, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Volkswagen Crafter 2
And finally, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Crafter 2. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Volkswagen Crafter 2?
Price of swapping a damaged reversing parking sensor for an Volkswagen Crafter 2
The replacement of a damaged reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a workshop.
Price of an ultrasonic parking sensors with drilling for Volkswagen Crafter 2
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable system.
Price of a parking sensors kit without drilling for a Volkswagen Crafter 2
.
At last, for the price of a reversing radar without drilling for your Volkswagen Crafter 2, whatever type you select, you will have to pay among 30 and 60 euros.
To get more tips on the Volkswagen Crafter 2, take a look at the Volkswagen Crafter 2 category.
